Dynamic Domain Name Service - LevelOne AMG-2100 User Manual

8.5 Dynamic Domain Name Service

Configure Dynamic Domain Name Service, go to: Network >> DDNS.
Before activating this function, you must have your Dynamic DNS hostname registered with a Dynamic
DNS provider. AMG-2100/AMG-2101 supports DNS function to alias the dynamic IP address for the
WAN port to a static domain name, allowing the administrator to easily access AMG-2100/AMG-2101's
WAN. If the dynamic DHCP is activated at the WAN port, it will update the IP address of the DNS server
periodically. These settings will become effective immediately after clicking Apply.
DDNS: Enable or disable this function.
Provider: Select the DNS provider.
Host name: The IP address/domain name of the WAN port.
Username/E-mail: The register ID (username or e-mail) for the DNS provider.
Password/Key: The register password for the DNS provider.
Note:
To apply for free Dynamic DNS service, you may go to
http://www.dyndns.com/services/dns/dyndns/howto.html.
AMG-2100 Gigabit Access and AP Management Gateway/
AMG-2101 Gigabit Access and AP Management Gateway Plus
125
User's Manual