Remote Vpn - LevelOne AMG-2100 User Manual

11.2 Remote VPN

Configure Remote VPN, go to: Network >> VPN >>Remote VPN.
AMG-2100/AMG-2101 support Remote VPN for user login to system from remote area. After the user
is login to system from the outside network of WAN, the user will feel that it is look like login to
AMG-2100/AMG-2101 under the service zone locally. They also can be applied Policy and are controlled
by system to access the network.
All settings are look like the settings in Service Zone. It also can setup the SIP WAN Interface,
Authentication Options, Group Permission, Applied Policy and customizable Login Page.
After Remote VPN is enabled, when you browse the home page with the WAN IP, you will get the
Remote VPN login page, input the enabled authentication options username and password, then you
will login success to system.
Caution:
After Remote VPN is enabled, the default home page will be the Remove VPN login page. If you want
to access the WMI of AMG-2100/AMG-2101, please input "login.shtml" after the WAN IP. For example,
it may be: "http://10.2.3.4/login.shtnl"
AMG-2100 Gigabit Access and AP Management Gateway/
AMG-2101 Gigabit Access and AP Management Gateway Plus
163
User's Manual