Step 7 : Restart WHG-1000
Click Reboot, the Reboot page will appear
Click Reboot button to start the restarting process.
Plese don't interrupt the system during the restarting process.
When the "Home Page" appears, it means the restart process is now completed.
5. User Login
To verify whether the configuration of the new Local Radius accounts created via the Quick Configuration has
been completed successfully :
Step :
1. Connect a client device (e.g. Notebook) with wireless interface to scan the configured ESSID of WHG-
1000 (e.g. AP00) and get associated with this ESSID.
2. The client device will obtain an IP address automatically via DHCP from WHG-1000. Open a web
browser on a client device, access any URL, and then the Domain1 User Login Page will appear.
300Mbps Wireless PoE Hotspot Gateway
WHG-1000
14
Quick Installation Guide