Hardware Installation - LevelOne AMG-2100 User Manual

2.5 Hardware Installation

Please follow the steps below to install the hardware of AMG-2100/AMG-2101:
1) Connect the power cord to the power socket on the rear panel.
2) Turn on ( | ) the power switch on the rear panel. The Power LED should be on to indicate a proper
connection.
3) Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the
Ethernet cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this
port should be on to indicate a proper connection.
4) Connect an Ethernet cable to the Mgmt Port on the front panel. Connect the other end of the
Ethernet cable to an administrator PC for configuring the AMG-2100/AMG-2101 system. Connect an
Ethernet cable to the LAN1 or LAN2 Port on the front panel. Connect the other end of the Ethernet
cable to an AP for extending wireless coverage; a switch for connecting more wired clients; or
directly to a client PC. The LED of port should be on to indicate a proper connection.
AMG-2100 Gigabit Access and AP Management Gateway/
AMG-2101 Gigabit Access and AP Management Gateway Plus
12
User's Manual