Table of Contents
Advertisement
3.2.2. User Login Portal Page
To login from the login portal page via the LAN1~LAN4 port, the user have to be identified the user name and
password. The administrator also can verify the correctness of the configuration steps of AMG-2000.
1. First, connect a user-end device (for example, a PC)
to one of the LAN1~LAN4 port of the AMG-2000, and
set the device to obtain IP address automatically.
After the user end obtains the IP address, please
open an Internet browser and the default user login
webpage will appear on the Internet browser.
Type in user information of a valid user account.
Assumes local user database is chosen in the
configuration wizard, key in the username and
password created and then click Submit button (e.g.
test@Local for the username and test for the password).
2. Login success page appearing means AMG-2000
has been installed and configured successfully.
Now, you can browse the network or surf the
Internet!
3. But if you see the following screen with a sentence,
"Sorry, this feature is available for on-demand user
only", it means you click the "Remaining" button by
mistake. This button is only for on-demand users and if
you are not an on-demand user, please just click the
Submit button.
18
Advertisement
Table of Contents
