Table of Contents
Advertisement
3.4.2 Load Balance
Configure Load Balance
Go to: System >> WAN Traffic.
Enable Load Balancing: Outbound load balancing is supported by the system. When enabled, the
system will allocate traffic between WAN1 and WAN2 dynamically according to designed algorithms
based on the weight ratio.
WAN1 Weight: The percentage of traffic through WAN1. (Range: 1~99; by default, it is 50)
Base: The weight ratio between WAN1 and WAN2 can be based on Sessions, Packets or Bytes.
Packets and Bytes are based on historic data. New connection sessions will be distributed
between WAN1 and WAN2 by a weight ratio using random number.
AMG-2100
AMG-2101
:
Gigabit Access and AP Management Gateway/
Gigabit Access and AP Management Gateway Plus
26
User's Manual
Advertisement
Table of Contents
