Manually Add Ap - LevelOne AMG-2100 User Manual

5.7.5 Manually add AP

Configure AP adding by Manually, go to: Access Points >> Adding.
The AP also can be added manually even though when it is offline. Input the related data of the AP and
select a Template. After clicking Add, the AP will be added to the managed list.
AP Type: This is the supported type of APs for centralized management.
AP Name: Mnemonic name of the specific AP.
Admin Password: Password required for this AP.
IP Address: IP address of the specified AP.
MAC Address: MAC address of the specific AP.
Remark: Some extra information to be filled in for this AP if desired.
Service Zone (Tag-Based only): This item is only shown when Tag-Based mode is selected
in System Configuration >> LAN Port Mapping. Select the name of Service Zone such as
Service Zone 1, Guest or Employee. And it is only for Multi-VAP AP only.
Template Applied: The template which will be applied to the added AP.
Channel: The selected channel will be applied to the added AP.
AMG-2100 Gigabit Access and AP Management Gateway/
AMG-2101 Gigabit Access and AP Management Gateway Plus
85
User's Manual