Console Interface - LevelOne AMG-2100 User Manual

9.12 Console Interface

Via this port to enter the console interface for the
administrator to handle the problems and situations
occurred during operation.
1. In order to connect to the console port of
AMG-2100/AMG-2101, a console, modem cable
and a terminal simulation program, such as the
Hyper Terminal are needed.
2. If a Hyper Terminal is used, please set the
parameters as 9600, 8, None, 1, None.
Caution:
The main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the
keyboard to browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of AMG-2100/AMG-2101 is connected properly, the console main screen will
appear automatically. If the screen does not appear in the terminal simulation program
automatically, please try to press the arrow keys, so that the terminal simulation program will send
some messages to the system, where the welcome screen or main menu should appear. If the
welcome screen or main menu of the console still does not pop up, please check the connection of
the cables and the settings of the terminal simulation program.
AMG-2100 Gigabit Access and AP Management Gateway/
AMG-2101 Gigabit Access and AP Management Gateway Plus
140
User's Manual