Console Interface - LevelOne AMG-2102 User Manual

9.12 Console Interface

Via this port to enter the console interface for the
administrator to handle the problems and situations
occurred during operation.
1. In order to connect to the console port of
AMG-2102, a console, modem cable and a
terminal simulation program, such as the Hyper
Terminal are needed.
2. If a Hyper Terminal is used, please set the
parameters as 9600, 8, None, 1, None.
Caution:
The main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the
keyboard to browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of AMG-2102 is connected properly, the console main screen will appear
automatically. If the screen does not appear in the terminal simulation program automatically,
please try to press the arrow keys, so that the terminal simulation program will send some
messages to the system, where the welcome screen or main menu should appear. If the welcome
screen or main menu of the console still does not pop up, please check the connection of the cables
and the settings of the terminal simulation program.
AMG-2102 Gigabit Access and AP Management Gateway Pro
152
User's Manual