Table of Contents
Advertisement
4.3
Configuring VOI-8000 from console port.
You can set up VOI-8000 by its console port. Please follow the steps below.
1) Connect your PC`s COM port to the console port of the VOI-8000 with a RS-232 cable.
2) Start up your terminal program. Ex: Hyper Terminal.
3) Set up the parameters as below for your COM port:
Baud rate:
Data bit:
Parity Check:
Stop bit:
Flow Control: None
4) Power off and on the VOI-8000, the terminal will prompt "Console>" to show it is ready.
Under the console prompt, you may key in "net" for showing the available commands and information
associated with the commands.
36
19200bps
8
None
1
VOI-8000 User's Guide
Overview
Advertisement
Table of Contents
