Raymarine ST4000+ Owner's Handbook Manual page 78

81131_7.book Page 70 Wednesday, March 17, 2004 3:59 PM
70
2. Route the cable through the pedestal (or guard rail) and back to the
control unit:
•
3. Run the drive cable back to the control unit and connect the two
cores to the Drive terminals as shown.
ST4000+ Wheel & Tiller Autopilots: Owner's Handbook
if the pedestal has a cable duct, use this for the drive cable to
make sure that it cannot foul the steering mechanism
Brown
D5338-1
Blue
D3284-2