Emc Installation Guidelines - Raymarine ST4000+ Owner's Handbook Manual

81131_7.book Page 36 Wednesday, March 17, 2004 3:59 PM
36
heel drive parts
Wheel drive parts
Wheel drive
Wheel drive
Optional: Bulkhead/box pedestal fitting kit E15017 (if required)
Optional: Bulkhead/box pedestal fitting kit E15017 (if required)

EMC installation guidelines

All Raymarine equipment and accessories are designed to the best
industry standards for use in the recreational marine environment.
Their design and manufacture conforms to the appropriate
Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not
compromised.
Although every effort has been taken to ensure that they will perform
under all conditions, it is important to understand what factors could
affect the operation of the product.
The guidelines given here describe the conditions for optimum EMC
performance, but it is recognized that it may not be possible to meet
all of these conditions in all situations. To ensure the best possible
conditions for EMC performance within the constraints imposed by
any location, always ensure the maximum separation possible
between different items of electrical equipment.
For optimum EMC performance, it is recommended that wherever
possible:
ST4000+ Wheel & Tiller Autopilots: Owner's Handbook
Pedestal bracket 16 mm spoke
Pedestal bracket 16 mm spoke
clamp insert (x3)
clamp insert (x3)
Clamp screw,
Clamp screw,
Spoke clamp (x3) M5 x 16 mm (x6)
Spoke clamp (x3) M5 x 16 mm (x6)
6 mm
6 mm
drill bit
drill bit
Power cable
Power cable
4.5 m (15 ft)
4.5 m (15 ft)
12 mm spoke
12 mm spoke
clamp insert (x3)
clamp insert (x3)
Bracket screw,
Bracket screw,
No 10 x 3/4 in (x4)
No 10 x 3/4 in (x4)
4 mm
4 mm
drill bit
drill bit
3 mm
3 mm
allen key
allen key
Cable clip
Cable clip
and screw,
and screw,
No 6 x 1/2 in
No 6 x 1/2 in
5439-2
D5439-1