Raymarine ST4000+ Owner's Handbook Manual page 101

81131_7.book Page 93 Wednesday, March 17, 2004 3:59 PM
Chapter 7: Customizing the ST4000+
Press disp to move to the next data page you want to change, or
•
press and hold standby for 2 seconds to exit and save changes.
The available pages are:
Data
Speed Knots
Log
Trip
Average Speed, Knots
Wind Direction
Wind Speed
Depth Metres*
Depth Feet*
Depth Fathoms*
Heading
Water Temperature, Degrees C* WATER °C
Water Temperature, Degrees F*
Course Over Ground
Speed Over Ground, Knots
Cross Track Error
Distance to Waypoint
Bearing to Waypoint
Rudder Gain
Response
Watch
Universal Time Coordinated
NOT USED
*Note: There are 3 depth pages (meters, feet and fathoms) and 2 water
temperature pages (°C and °F). The ST4000+ will display the water temperature
or depth data in the units defined by page you select.
Displayed as
SPEED KTS
LOG XXXX.X
TRIP XXX.X
AV. SPD KTS
e.g. WIND PORT
WIND KTS
DEPTH M
DEPTH FT
DEPTH FA
HEADING
WATER °F
COG
SOG KTS
XTE
DTW
BTW
RUDD GAIN
RESPONSE
WATCH - used to control the Watch timer
UTC
Page not displayed
(Any data page set to NOT USED is not
displayed when you scroll through the data
pages during normal operation)
93