Control Unit; Location - Raymarine ST4000+ Owner's Handbook Manual

Wheel & tiller autopilots
Hide thumbs Also See for ST4000+:
Table of Contents

Advertisement

81131_7.book Page 38 Wednesday, March 17, 2004 3:59 PM
38

5.2 Control unit

Control unit dimensions

Location

Locate the ST4000+ control unit so it is:
within easy reach from the steering position
viewable straight on, or with a maximum viewing angle of 30°
protected from physical damage
at least 230 mm (9 in) from any compass
at least 1 m (3 ft) from any radio/radar receivers/transmitters
The selected location should also:
be clean, smooth and flat
be accessible from behind (so you can secure and run cables)
have sufficient space to accommodate the rear of the control unit
and connectors
allow at least 6 mm (
instruments so you can fit their sun covers
CAUTION:
The ST4000+ front cover is waterproof when installed according
to the following instructions. However, the rear cover must be
protected from water in a ventilated and drained area. Any water
or water vapor in this area could cause damage by coming into
contact with electrical connections or condensation by entering
the control unit through its breathing hole.
ST4000+ Wheel & Tiller Autopilots: Owner's Handbook
110 mm (4.33 in)
1
/
in) between adjacent control units and
4
24 mm
17 mm
(0.95 in)
(0.67 in)
D3242-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents