81131_7.book Page 5 Wednesday, March 17, 2004 3:59 PM
Chapter 2: Basic Operation
2.2 Using Auto mode
Engaging the autopilot (Auto mode)
1. Steady the boat on the required heading.
2. Wheel Pilot: Engage the wheel drive clutch by rotating the clutch
lever clockwise (so the lever engages fully onto the locating pip).
Tiller Pilot: Place the pushrod end over the tiller pin. If necessary,
extend or retract the pushrod using the -1, +1, -10 and +10 keys.
WARNING: Wheel drive clutch
Always reach AROUND (not through) the wheel to operate the
wheel drive clutch lever.
.
Wheel pilot
Tiller pilot
Use these keys to
extend or retract the pushrod
3. Press auto:
•
in Auto mode, the display shows the locked autopilot heading
5
Engage the clutch
on the wheel pilot
a
b
D5341-1
D3560-2