Oscillator - Yamaha RIVAGE PM10 Operation Manual

Monitor  OSCILLATOR
2.
Press the OSCILLATOR popup button or the ASSIGN field to open the
OSCILLATOR popup window.
In this popup window, you can make detailed settings for the oscillator.
1 2
1
OSCILLATOR MODE buttons
Select one of the following four oscillator operating modes:
SINE WAVE A sine wave is output continuously.
SINE WAVE 2CH Two sine waves (with different frequencies) are output separately.
PINK NOISE Pink noise is output.
BURST NOISE Pink noise is output intermittently.
2
Parameter field
Enables you to set the oscillator parameters. The controllers and their functions in this field
vary depending on the operating mode 1.
5 6 8
7
4
3
SINE WAVE:
• LEVEL knob
Indicates the output level of the sine wave. Use the screen encoder to adjust the value.
• FREQUENCY knob
Indicates the frequency of the sine wave. Use the screen encoder to adjust the value.
• FREQUENCY buttons
Enables you to select the sine-wave frequency from 100 Hz, 1 kHz, and 10 kHz.
SINE WAVE 2CH:
• LEVEL knob (ODD)
Indicates the output level of the odd-channel sine wave. Use the screen encoder to adjust the
value.
• FREQ knob (ODD)
Indicates the frequency of the odd-channel sine wave. Use the screen encoder to adjust the
value.
• LEVEL knob (EVEN)
Indicates the output level of the even-channel sine wave. Use the screen encoder to adjust
the value.
• FREQ knob (EVEN)
Indicates the frequency of the even-channel sine wave. Use the screen encoder to adjust the
value.
• FREQUENCY buttons
Enables you to select the sine-wave frequency from 100 Hz, 1 kHz, and 10 kHz.
The default frequency is 1 kHz for the odd channel and 400 Hz for the even channel. Two
meters (odd and even) will be displayed.
90
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ