Yamaha RIVAGE PM10 Operation Manual page 35

Screen Overview  About the SELECTED CHANNEL VIEW screen
■ Fader strip field
1
LEVEL meter
Indicates the POST ON level of a channel.
2
CUE ON button
Switches Cue Out on or off. The button also
indicates the selected cue bus(es).
3 ON button
Switches the channel on or off.
4 FADER knob
Adjusts the channel fader level.
■ CH MODE field
1 L/R PATH pull-down menu
Appears if the input channels are paired. You can
select MONO, STEREO, L/L, or R/R as the audio
combination input to the input channels.
2
NAME popup buttons
Press this button to access the NAME/ICON EDIT
popup window (page 72).
3 Pair setting popup button
Press this button to access the CHANNEL
PAIRING popup window (page 32).
■ PATCH field
1
INPUT A/B switch buttons
Switch between INPUT A and
INPUT B.
2 PATCH popup button
Press this button to access the
patching popup window. The button
will indicate the patch setting.
3
1
4
2
1
2
3
2
1
■ ANALOG GAIN field
1
ANALOG GAIN knob
Sets the analog gain of the head amp. If the Gain
Compensation function is turned on, a blue
indicator appears, showing the analog gain
position at the time the function was turned on.
2
HA meter
Indicates the level immediately after the analog
head amp.
3 +48V indicator
Indicates the phantom power (+48V) on or off status for the head amp.
4 HPF indicator
Indicates the on/off status of the HPF immediately after the external head amp.
5 GANG button
Appears if channels are paired.
If this button is on, then differences in HA analog gain will be maintained. This button is
linked with the digital gain GANG button.
■ SILK field
1 SILK [TEXTURE] knob
Adjusts the Silk TEXTURE parameter.
2 SILK [ON] key
Switches SILK on or off.
3 SILK [BLUE/RED] key
Toggles between BLUE and RED: "BLUE" for
solidity and power, and "RED" for sparkling
energy.
35
CONTENTS FUNCTION MAP
1
2
3
4
5
1
RIVAGE PM10 Operation Manual
FAQ
2
3