Yamaha RIVAGE PM10 Operation Manual page 50

System Setup  SYSTEM CONFIG
4 Channel assign popup buttons (DIRECT OUT 1-72)
5 Channel assign popup buttons (DIRECT OUT 73-144)
When you press a button, an TWINLANe CONFIGURATION popup window appears, in
which you can assign the direct out to the TWINLANe network.
6
MY SLOT (1–2) popup buttons
Press a button to open the MY CARD SELECT window, in which you can select a Mini-
YGDAI card.
7 HY SLOT (3–4) popup buttons
Press a button to open the HY CARD SELECT window, in which you can select an HY card.
8 HIGH Fs FORMAT select buttons
When a Mini-YGDAI card is using high sampling (88.2 kHz, 96 kHz), these buttons enable
you to select the operating mode as DOUBLE SPEED, DOUBLE CHANNEL, or SINGLE for
IN and OUT respectively.
NOTE
This setting will be ignored if you try to specify the operating mode for an MY card that does not
support high sampling.
9
Channel assignment indication
This area shows the number of channels assigned in the TWINLANe CONFIGURATION
popup window.
) REVERT ALL button
When you press this button, all changes in channel assignments that you made up to that point
will be canceled, reverting to the state prior to the changes.
! APPLY button
When you press this button, the channel assignment number changes you made are applied to
the TWINLANe network.
@
Parameter settings popup buttons
Press a button to access a popup window, in which you can set the parameters of each card.
4.
Press each channel assign popup button to access the TWINLANe
CONFIGURATION popup window.
Each settings window contains the following items.
TWINLANe CONFIGURATION popup window
1
1
Tabs
Switch between MIX OUT, ST/MT/MON/CUE/TB, DIRECT OUT 1-72, and DIRECT OUT
73-144.
2 Channel select buttons
Select the channel to edit. The select button will change as follows.
............Currently not assigned to the TWINLANe network
............Currently assigned to the TWINLANe network
............Currently assigned to the TWINLANe network, and selected for
cancellation.
............Currently not assigned to the TWINLANe network, and selected for
assignment.
3 ALL OFF button
When you press this button, all channels assigned to TWINLANe are selected for cancellation
in a single operation.
50
CONTENTS FUNCTION MAP
2 3 4 5
RIVAGE PM10 Operation Manual
FAQ