Yamaha RIVAGE PM10 Operation Manual page 59

System Setup  SYSTEM CONFIG
I/O SELECT popup window
4.
Select the I/O rack (RPio622) that you want to use, and press the OK button.
You will return to the SYSTEM CONFIG popup window. To cancel, press the CANCEL
button.
If you want to add another I/O rack, repeat steps 3–4.
■ Specifying the type and number of cards
The following example explains how to add an RY card for use in the I/O rack. Use the same
procedure for adding a different card to a different component.
1.
Press the SETUP button on the menu bar to access the SETUP screen.
2.
Press the SYSTEM CONFIG button to access the SYSTEM CONFIG popup
window.
3.
Press the mounted I/O rack select popup button to access the I/O rack settings
popup window.
59
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ