Yamaha RIVAGE PM10 Operation Manual page 209

Scene Memory  Using the Focus function
4 ALL channel Focus ON button
Specifies whether you want to apply the Focus function to all channels.
5 Channel Focus ON button
Turn Focus on or off for each channel.
6
ALL ON button
Turns Focus on for all parameters on all channels.
7
ALL parameter ON buttons
Turn Focus on for all parameters that belong to the corresponding channels.
8
ALL channel ON buttons
Turn Focus on or off for all channels related to the selected parameter.
9
Parameter ON buttons
Turn Focus on or off for parameters on each channel.
)
FADER BANK SELECT buttons
Specify for each bay individually whether the Focus function will be applied to the fader layer
position.
4.
To select a channel that you want to set up, press the + button of the channel
display 2 to expand the channel display, and then scroll through the category
select list (channel) 1.
5.
If you want to apply the Focus function only to specific parameters, use the
9
parameter buttons to select those parameters (multiple selections are
allowed). If you want to apply the Focus function to all parameters, turn on the
ALL ON button 6.
6.
Turn on the channel Focus ON button
apply the Focus function.
If you want to apply the Focus function to all channels, turn on the ALL channel Focus ON
button 4.
NOTE
If you want to apply the Focus function to the fader layer position, use the FADER BANK
SELECT button ) to select it.
7.
When you finish making settings, press the "x" symbol to close the window.
The FOCUS PARAMETER indicator on the FOCUS tab of the SCENE LIST screen will show
the Focus setting status of the scene for which the Focus function is configured.
5 for the channels to which you want to
8.
Press the FOCUS button to enable the Focus function.
You can turn the Focus function on or off individually for each scene.
NOTE
Scenes for which the FOCUS button is turned on are marked by a "FOCUS" indicator in the
STATUS field of the SCENE LIST window (COMMENT tab).
9.
Recall a scene for which you have made Focus settings.
Only the channels/parameters selected in the FOCUS popup window will be recalled.
NOTE
You can use the Focus function in conjunction with the Recall Safe function. Channels or
parameters that are excluded from Recall operations by either Focus or Recall Safe will not be
recalled.
209
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ