Yamaha RIVAGE PM10 Operation Manual page 164

Plug-ins  Controlling the parameters of a plug-in
9 Mid Xover button
Adjusts the crossover frequency between the low-mid and middle frequency ranges of the
reverb tail.
) Hi Xover button
Adjusts the crossover frequency between the middle and high frequency ranges of the reverb
tail.
!
Reverb Type button
Selects the type of reverb effect.
@
Reverb Diffuse button
Adjusts the diffusion for the decay time.
#
Modulation Type button
Selects the type of modulation.
$
Modulation Rate button
Selects the rate of modulation.
%
Modulation Depth button
Selects the depth of modulation.
^
Dry Level button
Adjusts the level of the dry signal at the output stage.
■ Max100
Max100 reproduces a classic phaser that appeared in the second half of the 1970s and continues to
be popular today. With just four modes and a speed knob, it produces a variety of distinctive phase
sounds.
1 MODE knob
Switches the tonal character. There are four types that differ in modulation amplitude and
feedback amount.
2 SPEED knob
Adjusts the modulation speed.
3 FOOT switch
Switches the effect on/off.
164
CONTENTS FUNCTION MAP
1 2
3
RIVAGE PM10 Operation Manual
FAQ