Channel Strip Section (Bay L, Bay R, Bay C) - Yamaha RIVAGE PM10 Operation Manual

Part Names & Functions  Top panel of the control surface (CS-R10)
NOTICE
Never use a sharp or pointed object such as your fingernail to operate the touch screens. Doing
so may scratch the screens and render the touch screens inoperable.
2 [VIEW] key
Recalls and toggles between the OVERVIEW and SELECTED CHANNEL VIEW screens.
3 [MIX]/[MATRIX] keys
Specify the type of the send destination buses displayed on the OVERVIEW screen.
4 [1-12]/[13-24]/[25-36]/[37-48]/[49-60]/[61-72] keys
Enable you to select a bank for the send destination bus displayed on screen.

Channel Strip section (bay L, bay R, bay C)

1
2
3
4
)
5
6
7
8
9
!
@
#
13
CONTENTS FUNCTION MAP
1 Screen encoder (bay L and C
only)
Controls the knob currently selected
on the touch screen. The knob
function varies depending on the
screen currently displayed.
2
Channel strip encoder
Adjusts the gain, pan, and the other
parameters of the channel. You can
assign five parameter functions
(selected from the following list) to
this encoder, and use the [UP]/
[DOWN] keys to select the
function.
• PAN/BALANCE
• ANALOG GAIN
• DIGITAL GAIN
• HPF FREQUENCY
• LPF FREQUENCY
• DYNAMICS1 THRESHOLD
• DYNAMICS2 THRESHOLD
3 [Fn] key
Executes the function as assigned by
the user. You can assign one of the
following functions:
• INPUT A/B
• ISOLATE
• ALTERNATE CUE
• ENCODER PARAMETER
4 [SEL] key
Enables you to select the channel
$
that will be controlled in the
Channel Strip section or on the
display. When the channel is
selected, the key LED will light.
RIVAGE PM10 Operation Manual
FAQ