Utility Section - Yamaha RIVAGE PM10 Operation Manual

Part Names & Functions  Top panel of the control surface (CS-R10)
MIX/MATRIX SENDS
2
4
3
1
1 MIX/MATRIX knobs
5
Adjust the send levels for the corresponding buses.
2 MIX/MATRIX SENDS [PRE] keys
Toggle the send point between PRE and POST. If a key
lights up, the send point is set to PRE.
3
MIX/MATRIX SENDS [ON] keys
Switch the send signal to the corresponding bus on or off.
6
4
MIX/MATRIX SENDS display
Indicates the corresponding bus.
5
MIX/MATRIX SENDS [MIX]/[MATRIX] keys
Switch the type of the send destination bus.
6
MIX/MATRIX SENDS [1-12]/[13-24]/[25-36]/
[37-48]/[49-60]/[61-72] keys
Selects a bank for the send destination bus.

UTILITY section

1
1
2
2
3
4
5
6
7
8
9
10
CONTENTS FUNCTION MAP
POWER Indicator
Lights when AC power to the unit is ON. If both power
switches A and B are turned on, this indicator will light
green. If either power switch A or B is turned on, it will light
red. If the RIVAGE PM 10 system is not started, it will light
orange.
USB port
Enables you to connect a USB device (such as a mouse,
keyboard, or USB flash drive).
■ Supported USB flash drive format
The FAT16 and FAT32 formats are supported.
■ Write Protection
Some USB flash drives feature write protection that
prevents data from being erased inadvertently.
If your USB flash drive contains important data, we suggest
that you use write protection to prevent accidental erasure.
On the other hand, you will need to make sure that your
USB flash drive's write-protect setting is turned off before
you save data onto the USB flash drive.
For the latest information on USB flash drives that can be
used with the system, visit the Yamaha Pro Audio website at:
http://www.yamahaproaudio.com/
NOTICE
Do not remove the USB flash drive from the USB connector
or turn off the power to the unit while the unit is accessing
data, e.g., saving, loading or deleting data. Doing so may
damage your flash drive, or may damage the data in the unit
or on your media device.
RIVAGE PM10 Operation Manual
FAQ