Install the heatsink.
3.
Close and lock the heatsink retaining latches.
4.
Install the air baffle
5.
Install the PCI riser cage
6.
Install the access panel
7.
Install the server into the rack.
8.
Power up the server.
9.
Processor
CAUTION:
should attempt to replace or install the processor in this server.
("Air
baffle" on page 53).
("PCI riser
cage" on page 43).
("Access
panel" on page 33).
To avoid damage to the processor and system board, only authorized personnel
Removal and replacement procedures 57