CAUTION:
To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
To replace a processor:
IMPORTANT:
If the processor has separated from the installation tool, carefully re-insert the processor in the tool.
1.
Align the processor installation tool with the socket and install the spare processor.
2.
CAUTION:
The processor is designed to fit one way into the socket. Use the alignment guides on
the processor and socket to properly align the processor with the socket. Refer to the server hood
label for specific instructions.
Be sure the processor remains inside the processor installation tool.
Removal and replacement procedures 59