Sff Hard Drive Backplane - HP ProLiant DL385 G7 Maintenance And Service Manual

Remove the power supply backplane.
5.
To replace the component, reverse the removal procedure.

SFF hard drive backplane

To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove all hot-plug hard drives
4.
Disconnect all cables from the hard drive backplane.
5.
rack" on page 27).
("Access panel" on page 33).
("Hot-plug SAS hard
("Remove the server from the
drive" on page 30).
Removal and replacement procedures 38
rack" on page 27, "Extend the