HP ProLiant DL385 G7 Maintenance And Service Manual page 76

Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
10.
Install the heatsink.
11.
Install all components removed from the failed system board.
12.
Install the access panel
13.
Install the power supplies
14.
Power up the server.
15.
IMPORTANT:
system board.
After you replace the system board, you must re-enter the server serial number and the product ID.
During the server startup sequence, press the F9 key to access RBSU.
1.
Select the Advanced Options menu.
2.
Select Service Options.
3.
Select Serial Number. The following warnings appear:
4.
("Access panel" on page 33).
("Hot-plug power supply" on page 31).
Install all components with the same configuration that was used on the failed
Removal and replacement procedures 76