If full-length expansion boards are installed, remove the full-length expansion board shipping
o
bracket as indicated.
PCI riser cage
To remove the component:
CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
If any full-length expansion boards are installed, remove the full-length expansion board shipping
4.
bracket.
To prevent damage to the server or expansion boards, power down the server and
rack" on page 27).
("Access
panel" on page 33).
("Remove the server from the
Removal and replacement procedures 43
rack" on page 27,
"Extend the