Dimms - HP ProLiant DL385 G7 Maintenance And Service Manual

3
3
3
3
—
*These are the only configurations supported by UDIMMs. All configurations listed in this table
are supported by RDIMMs.
—
LVDIMM support is dependent on the ROM version.
—
This table is for reference only. It may not be updated to reflect recent changes.
800 MHz—The memory bus speed is set to 800 MHz regardless of the quantity of memory modules
o
installed, unless the table above reflects a slower memory bus speed.
NOTE:

DIMMs

To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
QR 1066 MHz
— 3 SR SR 1333 MHz
— 3 DR DR 1333 MHz
DR 1066 MHz
— 3 mixed SR 1333 MHz
DR 1333 MHz
DR 1066 MHz
1 2 SR 1333 MHz
DR 1333 MHz
DR 1066 MHz
QR 1066 MHz
There may be more than one memory bus speed menu option.
rack" on page 27).
("Access panel" on page 33).
("PCI riser
("Air baffle" on page 53).
1333 MHz
1066 MHz
1066 MHz
800 MHz
("Remove the server from the
cage" on page 43).
1066 MHz
800 MHz
800 MHz
667 MHz
rack" on page 27,
Removal and replacement procedures 65
"Extend the