Carriage Assembly; Rep5.2Carriagemotor - Xerox Document Workcenter 150 Service Manual

REP 5.2 Carriage Motor k,
Part List on PL 5.1
CAUTION
Leaving the Ink Cartridge removed for tong
pedods of time will cause the ink nozzles to
dry out. Image quality problems or a blank
print could result. If necessary, prime the Ink
Cartridge after
reinstallation.
1. Disconnect the Power Cord from the outlet.
2.
Remove the following:
a. Ink Cartridge Cover (PL 3.1).
b. Ink Cartridge.
c. Rear Cover (REP 1.2).
d. Printer and Tray Assembly (REP 3.1).
e. Printer Assembly (REP 3.2).
f. Carriage Assembly (REP 3.5).
3. Turn the Carriage Assembly over.
4. Remove the Carriage Motor (Figure 1).
1. Reinstall the components in the reverse order.
Adjustments
1. Head Gap (ADJ 5.2).
2. Grid Adjust (ADJ 5.1).
Figure 1
Removing the Carriage Motor
Document WorkCenter 150
51%
4-23 REP 5.2 Carriage Motor