Table of Contents
Advertisement
REP 6.1
Paper Feed Roller
Part List on PL 6.1
Removal
CAUTION
Leaving the Ink Cartridge removed for tong
periods of time will cause the ink nozzles to
dry out. tmage quality problems or a blank
print could result. If necessary prime the Ink
Cartridge after reinstallation.
1.
Disconnect the Power Cord from the outlet.
2.
Remove the following:
a.
Ink Cartridge Cover (PL 3.1).
b.
Ink Cartridge.
c.
Rear Cover (REP 1.2).
d.
Printer and Tray Assembly (REP 3.1).
e.
Printer Assembly (REP 3.2).
f.
Carriage Assembly (REP 3.5).
g.
Side Frame Assembly (REP 3.6).
3.
Remove the Paper Feed Roller (Figure 1).
a.
Remove the Reverse Spring.
b.
Remove the E-rings (2). Bushings (2).
and washer (1).
c.
Slide off the Gear Guard.
d.
Remove
the Paper Feed Roller, Slip
Spring Spacer, and Slip Spring.
Replacement
1.
Reinstall the components in the reverse order.
Adjustments
I.
Head Gap (ADJ 5.2)
2.
Grid Adjust (ADJ 5.1)
Paper Feed Roller
Gear Guard
/
I
Bushing
/
E-Ring
Figure 1
Removing
the Paper Feed Roller
Document
WorkCenter
150
9%
4-31
REP 6.1 Paper Feed Roller
Advertisement
Chapters
Table of Contents
