Xerox Document Workcenter 150 Service Manual page 95

REP 8.4 Power Supply PWB &,
Parts List on PL 8.1
Removal
WARNING
Disconnect the Power Cord from the
Outlet.
1. Remove the following:
a. Rear Cover (REP 1.2)
b. Printer and Tray Assembly (REP 3.1)
CAUTION &,
Follow electrostatic discharge precaufions.
Static electric#y can damage fhis part.
1. Remove the Power Supply (Figure 1).
a. Disconnect cable CNl at the Power
SUPPlY.
b. Remove the fnre (5) mounting screws.
c. Disconnect the Power Supply from the
Main PWB.
d. Remove the Power Supply.
Replacement
1. Reinstall the components in the reverse order.
,
Power Supply
1
/:A.
Figure 1
Removing the Power Supply
Document WorkCenter 150
5196
4 - 39
REP a.4 Power Supply PWB