Iq Rap 12 Vertical/Horizontal Deletionsllines - Xerox Document Workcenter 150 Service Manual

IQ RAP 12 Vertical I horizontal deletions I lines
Procedure
1. The internal test pattern is good.
i N
I . Ensure that the reverse spring is attached to the slip spring and
frame.
. Ensure that the ink cartridge is installed correctly.
- Ensure that the connectors are not damaged and are correctly
seated on the main PWB.
* If the problem exists after periods of non use. check that the
Maintenance Station to cartridge seal is not damaged and the
Prime function/pump system isworking correctly (PL 5.1 PL 7.1).
* Prime the cartridge. More than one time may be required.
- If the problem still exists, replace the ink cartridge (PL 3.1)
* Perform RAP 27 Paper Feed Brake Solenoid.
2. Perform the following actions:
* Clean the scan. ADF, and eject rollers
* Remove the scanner assembly and check for an obstruction in the optical
path. Clean or repair as required.
I * Ensure that the earth spring is making contact with the ends of the ADF
roller, scan roller and eject roller.
The problem has been corrected.
i
N Replace the scanner assembly (REP 3.4).
3. Complete the call.
IQ RAP 12 Vertical I horizontal deletions I lines
3-6
Document WorkCenter 150