REP 3.5
Carriage Assembly
Parts List on PL 3.1
CAUTION
Leavinq the Ink Catiddae removed for long
m ink nozzles to
periods of time will cause iI
dry out. Image qualily pmblems or a blank
print could resdlt. If nece.ssa& prime the Ink
C&ridge
after reinstallation.
1. Disconnect the Power Cord from the outlet.
2.
Remove the following:
a.
Ink Cartridge Cover (PL 3.1).
b.
Ink Cartridge.
c.
Rear Cover (REP 1,2).
d.
Printer and Tray Assembly (REP 3.1).
e.
Printer Assembly (REP 3.2).
3.
Disconnect the maintenance tube from the
tank (Figure 1).
Maintenance Tube
Figure 1
Disconnecting the Maintenance Tube
Document WorkCenter 150
5/96
4-11
REP 3.5 Carriage Assembly