Xerox Document Workcenter 150 Service Manual page 72

REP4.1
Sensor
PWB k,
Parts List on PL 4.1
Removal
WARNING
Disconnect the Power Cord at the outlet
1. Remove the following:
a. Front Cover (REP 1.1).
b. Control Panel Assembly (REP 2.1)
c. Document Exit Guide (REP 2.2).
2. Remove the Scanner Cover from the Upper
Guide (Figure 1).
a. Open the Upper Scanner Guide.
b. Release the tabs and remove the
Scanner Cover.
3. Remove the Sensor Board PWE Assembly
(Figure 1).
a. Discamect the Sensor Board Cable
connector, CNl
b. Remove the board.
Sensor PWB
Scanner Cover
w
'Figure 1
Remjxing the Sensor
h
e r
Replacement
4. Reinstall the components in the reverse order.
REP 4.1 Sensor PWB
S/96
'l-16