Xerox Document Workcenter 150 Service Manual page 78

REP 5.1 Wiper Blades and Blotter(s)
Parts List on PL 5.1
CAUTION
Leaving the Ink Cartridge removed for long
periods of time will cause the ink nozzles to
dry out. Image quality pmblems or a blank
print could result. If necessary. prime the Ink
Cartridge after reinstallation.
Removal
1. Remove the following:
a. Ink Cartridge Cover (PL 3.1).
b. Ink Cartridge.
c. Paper Tray.
d. Paper Feed Guide Assembly
2. Disconnect the Power Cord from the outlet.
3. Remove the Wiper Blades from the
Maintenance Station (Figure 1).
CAUTION
Use cam when removing the Btotter(sj. The
plastic clip will bmak if overflexed.
NOTE: One or hvo Blotter(s) may be
used, depending on the configuration.
4. Remove the Blotter(s) from the clip on the
Carriage (Figure 1).
1. Ensure the Wiper Blades are fully seated.
2. Ensure the Blotter(s) are fully seated.
3. Reinstall the remaining components in the
reverse order.
Wiper Blades
!
'S ,
Carriage
"
mters
Plastic Clip
Figure 1
Removing the Wiper Blades and Blotter(s)
REP 5.1 Wiper Blades and Blotter(s)
996
4-22
Document WorkCenter ISI