REP 3.4
Scanner Assembly
Parts List on PL 3.1
Removal
WARNING
Disconnect
the Power Cord from the
OUllFA.
1. Remove the following:
a.
Front Cover (REP 1.1).
b.
Rear Cover (REP 1.2).
c.
&ntrol Panel Assembly (REP 2.1).
d. Document Exit Guide (REP 2.2).
B. Printer and Tray Assembly (REP 3.1).
I.
Scanner and Guide Assembly (REP 3.3).
2.
Remove the Scanner horn the Lelt and Right
Guides (Figure 1).
Replacement
1. Ensure that all cables on Ihe left side are
routed between the Lelt Guide mounting
bosses.
2.
Reinstall the componenls in lhe reverworder.
copy quality and accomplish CIS
necessary (see Section 6).
Figure
1
Removing the Scanner