Rec Out Mode - Denon AVR-2313CI Owner's Manual

REC OUT mode

• When using the audio/video recording connectors (MEDIA PLAYER
outputs), you can record the audio or video from a different program
source while listening to the currently played track.
• For the connection method, see "Connecting a media player"
(vpage 18).
1
Press ZONE2 / REC SOURCE
SOURCE" is displayed.
2
ZONE2 / REC SOURCE
Press to choose the input
source to be recorded.
ZONE2 SOURCE ZONE2 CBL/SAT
RECOUT DVD RECOUT CBL/SAT
3
Start recording.
• For operating instructions, refer to the respective device's
operating instructions.
DVD
ZONE2 / REC SOURCE
• To cancel, press
displayed.
• Make a test recording before starting the actual recording.
• The digital signal input into the HDMI, COAXIAL and OPTICAL
until "RECOUT
connectors is not output from the analog REC OUT connector.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• The operable buttons on the remote control unit in REC OUT mode
while it is in the operating mode for ZONE2 are as follows:
ZONE SELECT
• buttons
MUTE :
• button (
VOLUME
• button (df)
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which "Hide" is selected at "Hide Sources"
(vpage 117) cannot be selected.
ZONE2 DVD
• To record video signals through this unit, use the video cable for
connection between this unit and the player.
RECOUT SOURCE
until "ZONE2 SOURCE" is
)
92