Other Operations And Functions; Other Operations; Recording On An External Device (Rec Out Mode); Convenient Functions - Denon AVR 689 - AV Receiver Owner's Manual

ENGLISH

Other Operations and Functions

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT> <INPUT MODE>
<POWER> QUICK SELECT
<ZONE2 / REC SELECT>
[Front]
QUICK SELECT
[CH SELECT/
ENTER]
uiop


Other Operations

BUTTON
<BUTTON> Recording on an External Device
[BUTTON]
(REC OUT mode)
You can listen to one program source while recording a different
program source.
<SPEAKERS>
ui
1
<ZONE2/REC SELECT>
Press
appears on the display.
2
<SOURCE SELECT>
Turn
to be recorded.
The "REC" indicator and the indicator for the selected source
light.
RECOUT SOURCE
<SELECT/ENTER>, op
3
Play the program source.
[Rear] For operating instructions, refer to the respective equipment's
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
40).
4
Start recording.
For operating instructions, refer to the respective equipment's
operating instructions.
[CH SELECT/
ENTER]
uiop
until "RECOUT"
ZONE2 RECOUT
to choose the input source
RECOUT TUNER ···· RECOUT SIRIUS
<ZONE2/REC SELECT>
• To cancel, press , then turn
until "RECOUT SOURCE" is displayed.
• Make a test recording before starting the actual recording.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit's ZONE2 mode
buttons cannot be operated.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Digital signals are not output from the REC OUT (CDR/TAPE and
VCR) connector.
• Audio and video signals input from the VCR IN connector are not
output from the VCR OUT connector. Audio signal input from the
CD-R/TAPE IN connector are not output from the CD-R/TAPE OUT
connector.

Convenient Functions

Channel Level

You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
1
<SELECT/ENTER> [CH SELECT/ENTER]
Press or
F L V o l . + 1 . 5 d B
2
<SELECT/ENTER> [CH SELECT/ENTER]
Use ui, or
to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
b In the case of a sub woofer, reducing the volume when it is at "–12
dB" will change the setting to OFF (none).
<SOURCE SELECT>
.