Denon AVR-2313CI Owner's Manual page 116

Info Display
Displays status of operation temporarily when the sound mode is changed, or input source is switched.
You can set whether or not to show each of these status displays.
Setting items
On-screen Info On : Turn display on.
Off : Turn display off.
Audio Display
Sets how long each menu is displayed when the input source is "NETWORK", "iPod/USB", or "FM".
Setting items
Audio Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
Off : Turn display off.
TV Format
Set the video signal format to be output for the TV you are using.
Setting items
Format NTSC : Select NTSC output.
PAL : Select PAL output.
"Format" can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's
3 seconds.
"V.Format : <NTSC>" appears on the display.
2. Use the main unit's
format.
3. Press the main unit's
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
DVD
Video
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
ZONE SOURCE STATUS
and for at least
TUNER PRESET CH +, –
and set the video signal
STATUS
to complete the setting.
113