Denon AVR-2313CI Owner's Manual page 135

Firmware
Set whether or not to check for firmware update, update the firmware, and display update and upgrade
notifications.
Setting items
Update Check for Update : Check for firmware updates. You can also check
Update the firmware of the approximately how long it will take to complete an update.
receiver. Update Start : Execute the update process.
When updating starts, the power indicator becomes red and the menu
NOTE
screen is shut down. The amount of update time which has elapsed is
In cases where it is not displayed.
possible to connect to When updating is complete, the power indicator becomes green and
the network after doing a
normal status is resumed.
firmware update, connect
• If updating fails, the set automatically retries, but if updating is still not
to the network again using
possible, one of the messages shown below is displayed. If the display
"Network" (vpage 124).
reads as shown below, check the settings and network environment,
then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
DVD
Default settings are underlined.
Setting details
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
Setting items
Notifications Update : The notification message is displayed for about 20 seconds when
Displays a notification the power is turned on. Connect to broadband Internet
message on this unit's when using this function.
menu screen when the • On : Display update message.
latest firmware is released • Off : Do not display update message.
with "Update".
Display a notification
• When you press
message on this unit's
notification message, the "Check for Update"
menu screen when
screen is displayed (Refer to
downloadable firmware is
more information on "Update").
released with "Add New
o
• Press
Feature".
message.
Upgrade : The notification message is displayed for about 20
seconds when the power is turned on. Connect to broadband Internet
(vpage 23) when using this function.
• On : Display upgrade message.
• Off : Do not display upgrade message.
• When you press
"Add New Feature" screen is displayed (Refer to
information on "Add New Feature").
o
• Press
132
Setting details
ENTER
during display of the
page 132 for
BACK
or to erase the notification
ENTER
during display of the notification message, the
page 133
BACK
or to erase the notification message.
v See overleaf
General
(vpage 23)
for more