Denon AVR-2313CI Owner's Manual page 123

Manual Setup
Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup.
• If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select
Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® (vpage 106).
• "Manual Setup" can be used without changing the settings. Please set if necessary.
Setting items
Amp Assign Assign Mode : Set the assignment mode.
Select power amplifier • Surround Back : Setting for 7.1-channel playback using surround back
usage method to match speakers.
your speaker system. • ZONE2 : Setting to assign the unit's built-in power amplifier for ZONE2
and output the audio in stereo.
• Bi-AMP : Setting to use the front speakers via the bi-amp connection.
• Front B : Setting to use the second set of front speakers for playback.
You can switch the front speakers A and B to be used for playback in
accordance with the 2-channel playback or multi-channel playback mode.
When you select this Front B setting, also perform the "Front Speaker
Setup" (vpage 123) procedure.
• Front Height : Setting for 7.1-channel playback using front height
speakers.
• Front Wide : Setting for 7.1-channel playback using front wide speakers.
Speaker Config. Front : Set the front speaker size.
Indicate speaker presence • Large : Use a large speaker that can adequately play back low
and select speaker size frequencies.
categories based on bass • Small : Use a small speaker that has inadequate playback capacity for
reproduction capability. low frequencies.
NOTE
• When "Subwoofer" is set to "No", "Front" is automatically set to
Do not use the outward
"Large".
shape of the speaker to
• When "Front" is set to "Small", "Center", "Surround", "Surr. Back",
determine selection of a
"Front Height" and "Front Wide" can not be set to "Large".
"Large" or "Small" speaker.
Instead, use the frequencies
set in "Crossovers"
(vpage 123) as the
standard for determining
bass reproduction capability.
DVD
Default settings are underlined.
Setting details
120
Setting items
Speaker Config. Center : Set the presence and size of the center speaker.
(Continued) • Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "Surr. Back", "Front Height" and
"Front Wide" can be set to "Large".
• When "Surround" is set to "None", "Surr. Back", "Front Height" and
"Front Wide" are automatically set to "None".
Speakers
Setting details
v See overleaf