Recording On An External Device (Rec Out Mode) - Denon AVR-3808 Owner's Manual

ENGLISH
<SOURCE SELECT> <DSP SIMULATION>
<STANDARD>
<POWER> CH SELECT
<ZONE2/3 / REC SELECT>
QUICK SELECT
CH SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Recording on an External Device
uiop
(REC OUT mode)
You can listen to one program source while recording a
different program source.
1
Press
"ZONE2 SOURCE" is shown on the display.
ZONE2 SOURCE
RECOUT NET/USB
QUICK SELECT
2
Turn
is displayed.
The "
3
Turn
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment's
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
48).
5
Start recording.
For operating instructions, refer to the respective equipment's
uiop
operating instructions.
<ZONE2/3 / REC SELECT>
.
ZONE2 TUNER ···· ZONE2 NET/USB
···· RECOUT TUNER RECOUT SOURCE
<SOURCE SELECT>
until "RECOUT SOURCE"
" indicator lights.
<SOURCE SELECT>
to choose the input source
• To cancel, press <ZONE2/3 / REC SELECT>, then turn <SOURCE SELECT>
until "ZONE2 SOURCE" is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• Digital audio signals input to the DENON LINK or HDMI connectors
are not output to the REC OUT connectors, so connect using the
OPTICAL or COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit's ZONE2 mode
buttons cannot be operated.
• The network audio signals (Internet radio, music server, USB) are not
output if they are copyright-protected.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• When "DENON LINK" is assigned at the GUI menu "Assign" setting,
the PCM signals, network audio signals (Internet radio, music server
and USB), input from the digital input connectors cannot be output
from the analog REC OUT connectors.
• Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.