Playback; Sleep Timer Function - Denon AVR-2313CI Owner's Manual

Playback

1
ZONE2
Press to switch the zone
mode to the ZONE2.
ZONE2
lights.
2
POWER X
Press to turn on the
ZONE2 power.
The indicator on the display lights.
• Also press input source select button when
in standby mode, the power turns on.
POWER X
• When is pressed, ZONE2 turns
off.
• Power in ZONE2 can be turned on or off by
ZONE2 ON/OFF
pressing on the main unit.
3
Press the input source select
button to select the input source
to be played.
The audio signal of the selected source
is output to ZONE2.
• To perform an operation with the main unit,
ZONE2 SOURCE
press many times.
ZONE2 SOURCE
Each time you press , the
input source changes.
When power for both MAIN ZONE and ZONE2 is set to ON, power
of the MAIN ZONE only can be turned off. In Step 1, press
POWER X
in this order.
DVD
Adjusting the volume
VOLUME df
Use to adjust the volume.
GAdjustable rangeH
(When the "Scale" (vpage 106) setting is "0 – 98")
GAdjustable rangeH – – –
(When the "Scale" (vpage 106) setting is "–79.5dB – 18.0dB")
• At time of purchase, "Volume Limit"
(–10dB)".
Input source
select buttons
MASTER VOLUME
Turn
unit to adjust the sound volume.
Turning off the sound temporarily
MUTE :
Press .
The sound is reduced to the level set at "Mute Level" (vpage 129)
in the menu.
• To cancel, either adjust the volume or press
• The setting can also be cancelled by adjusting the volume or turning
off the ZONE2 power.
You can adjust the tone and volume for ZONE2 in "ZONE2 Setup"
MAIN
(vpage 129) in the menu.
and
0 – 40 – 98
–79dB – –40dB – 18dB
(vpage 129) is set to "70
ZONE2 ON/OFF
after pressing on the main
MUTE :
again.
96

Sleep timer function

• This is convenient for viewing and listening while going to sleep in
ZONE2.
• The sleep timer function can be set by zone.
1
ZONE2
Press to switch the zone
mode to the ZONE2.
ZONE2
lights.
2
SLEEP
Press and display the time you want to set.
• The time switches as shown below each time
Off 10 min 20 30
120 100 90 80
110
To confirm the countdown time before putting the
unit to sleep
SLEEP
Press .
"Z2 Sleep : zmin" appears on the display.
z Countdown time
To cancel the sleep timer
SLEEP
Press to set "Off".
The sleep timer is also cancelled when this unit is set to the standby
mode or the ZONE2 power is turned off.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn off the power of those connected
devices, set up sleep timers on the connected devices themselves.
SLEEP
is pressed.
40 50
70 60