Denon AVR-2313CI Owner's Manual page 133

Quick Select Names
Change the "Quick Select" display title to one you prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
• Up to 16 characters can be input.
• For character input, see page 101.
Trigger Out
Selects when to activate trigger out.
For details about how to connect the TRIGGER OUT jack, see "TRIGGER OUT jack" (vpage 22).
n When setting for zone (MAIN ZONE / ZONE2)
Trigger out is activated through linkage to the power of the zone set to "On".
n When setting for input source
Activate trigger out when the input source set to "On" is selected.
Active for the zone set to "On" with "When setting for zone".
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to "On" is selected.
Activate trigger out when the HDMI monitor set to "On" is selected. Active when the "MAIN
ZONE" set to "On" with "When setting for zone" is selected, and when the input source set to
"On" with "When setting for input source" is selected.
• On : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
DVD
Setting details
Setting details
Auto Standby
When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, "Auto Standby" is
displayed on the display of this unit and the menu screen.
30min : The unit goes into standby after 30 minutes.
60min : The unit goes into standby after 60 minutes.
Off : The unit does not go into standby automatically.
Front Display
Adjust the display brightness of this unit.
Setting items
Dimmer Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
Off : Turns the display off.
Buttons on the main unit can be used for operations.
Each time
below.
NOTE
When "Dimmer" is set to "Off", the display turns off and appears as if
there is no electricity.
130
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
DIMMER
is pressed, the setting is changed as shown
Bright Dim
Off Dark
General