Denon AVR-2313CI Owner's Manual page 134

Information
Show information about receiver settings, input signals, etc.
Items
Sound Mode : The currently set surround mode.
Audio
Show information about Input Signal : The input signal type.
audio input signals. Format : The number of input signal channels (presence of front, surround,
LFE).
Sample Rate : The input signal's sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the
The figure is the corrected value. This cannot be changed.
Video Signal
Show information about • Resolution / Color Space / Pixel Depth
HDMI input/output signals
Monitor
and monitor.
• Interface / Resolutions
MAIN ZONE : This item shows information about settings for MAIN
ZONE
Show information about ZONE. The information displayed differs according to the input source.
current settings. • ZONE Name / Select Source / Name / Sound Mode / Input Mode /
Decode Mode / HDMI / Digital / Component / Rec Select / Video
Select / Video Mode / Content Type / Video Convert / i/p Scaler /
Resolution / Progressive Mode / Aspect Ratio etc.
ZONE2 : This item shows information about settings for ZONE2.
• ZONE Name / Power / Select Source / Volume Level
"Volume Level" for ZONE2 is displayed when "Assign Mode"
(vpage 120) is set to "ZONE2".
Firmware Version : Displays information for the current firmware.
DVD
Setting details
Dialogue normalization function
STATUS
on the main unit.
Offset: - 4dB
INFO
Press to display current source name, volume, sound mode name, and other information at the
bottom of the screen.
Examples of screen display
• Status display screen
When the input source is switched.
CBL/SAT
AUTO DTS VIDEO
DVD
SOURCE
DTS SURROUND
SOUND
Status display: The operating status appears briefly on the screen when the input
source is switched or the volume is changed.
NOTE
The status display screen cannot be displayed at a computer's resolution (e.g. VGA) or while certain 3D
video contents is being played.
131
When the volume is adjusted.
50.0
General