Denon AVR-2313CI Owner's Manual page 120

Hide Sources
Remove from the display input sources that are not used.
CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / iPod/USB / CD / FM / NETWORK / TV
AUDIO : Select input source that is not used.
• Show : Use this source.
• Hide : Do not use this source.
NOTE
• Input sources being used in the MAIN ZONE or ZONE2 cannot be selected.
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Hide" cannot be selected using the input source select button.
Source Level
• This function corrects the playback level of the selected input source's audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which "DIGITAL" is assigned at "Input Assign" (vpage 115).
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
Input Select
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
It is normally recommended
to set the audio input mode
• "Digital" can be set for input sources for which "DIGITAL" is assigned
to "Auto".
at "Input Assign" (vpage 116).
• If the input source is set to "CBL/SAT", "DVD", "Blu-ray", "MEDIA
PLAYER", "AUX" or "CD", it can be set to "Analog".
• When digital signals are properly input, the
the display. If the
(vpage 116) and the connections.
• If "HDMI Control" is set to "On" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV AUDIO" is fixed to ARC.
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source. DTS : Decode and play only DTS input signals.
CBL/SAT DVD
• This item can be set for input sources for which "DIGITAL" is assigned
Blu-ray GAME
at "Input Assign" (vpage 115).
AUX MEDIA PLAYER
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
CD TV AUDIO
117
Inputs
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check "Input Assign"