Surround - Denon AVR-2313CI Owner's Manual

Surround

This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater.
Sound modes and surround parameters
This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of "Speaker Config." (vpage 120).
Sound Mode (vpage 69)
Front
L/R
DIRECT/PURE DIRECT (2 channel) z1
S
DIRECT/PURE DIRECT (Multi-channel) z1
S
DSD DIRECT (2 channel) z1
S
DSD DIRECT (Multi-channel) z1
S
STEREO S
MULTI CH IN S
DOLBY PRO LOGIC gz S
DOLBY PRO LOGIC gx S
DOLBY PRO LOGIC g S
DOLBY PRO LOGIC S
DOLBY PRO LOGIC g A-DSX S
DOLBY PRO LOGIC A-DSX S
DTS NEO:6 S
DTS NEO:6 A-DSX S
Audyssey DSX ®
S
DOLBY DIGITAL S
DOLBY DIGITAL Plus S
DOLBY TrueHD S
DTS SURROUND S
DTS 96/24 S
DTS-HD S
DTS Express S
MULTI CH STEREO S
ROCK ARENA S
JAZZ CLUB S
MONO MOVIE S
VIDEO GAME S
MATRIX S
VIRTUAL S
DVD
Channel output
Surround Surround back Front height
Center
L/R L/R L/R
D z5 D z5
D D
D z5 D z5
D D
D z6
D D D
D D D
D D D
D D
D D
D z10
D D
D z10
D D
D D D
D z10
D D
D z10
D D
D z6
D D D
D z6
D D D
D z6
D D D
D z6
D D D
D z6
D D D
D z6
D D D
D z6
D D D
D z12 D z13
D D
D z12 D z13
D D
D z12 D z13
D D
D z12 D z13
D D
D z12 D z13
D D
D z12 D z13
D D
Surround Parameter (vpage 103)
Loudness
Cinema EQ
Front wide Management
z2
Subwoofer
L/R z3
(vpage 103)
(vpage 103)
D z4
S
D z5
D S
D z4
S
D z5
D S
D S
S z7
D
D S S
S z8
D S
S z9
D S
S z9
D S
D z11 S z9
D S
D z11 S z9
D S
S z8
D S
D z11 S z8
D S
D z11
D S S
S z7
D
S z7
D
S z7
D S
S z7
D
S z7
D
S z7
D
S z7
D
D z14
D S
D z14
D S
D z14
D S
D z14
D S
D z14
D S
D z14
D S
D S
141
z1 During playback in PURE DIRECT mode, the surround parameters are
the same as in DIRECT mode.
z2 This item cannot be selected during DSD (SA-CD) signal playback.
z3 This item can be selected when a Dolby TrueHD signal is played.
z4 Only when "Subwoofer Mode" is set to "LFE+Main" (vpage 121),
sound is output from the subwoofer.
z5 A signal for each channel contained in an input signal is output as
audio.
z6 Audio is output from the front height speaker when the set sound
mode name contains "+PLgz". For information on how to check the
sound mode, see page 69.
z7 This setting is unavailable when the set sound mode name contains
"+PLgx Music". For information on how to check the sound mode,
see page 69.
z8 This setting is possible when the sound mode is "PLgx Cinema" or
"DTS NEO:6 Cinema".
z9 This setting is possible when the sound mode is "PLg Cinema" or
"Pro Logic".
z10 Audio is output from the front height speaker when "Assign Mode"
(vpage 120) in the menu is set to "Front Height" and "Audyssey
DSX ® " (vpage 107) is set to "On".
z11 Audio is output from the front wide speaker when "Assign Mode"
(vpage 120) in the menu is set to "Front Wide" and "Audyssey
DSX ® " (vpage 107) is set to "On".
z12 Audio is output from the surround back speaker when "Assign Mode"
(vpage 120) in the menu is set to "Surround Back".
z13 Audio is output from the front height speaker when "Assign Mode"
(vpage 120) in the menu is set to "Front Height".
z14 Audio is output from the front wide speaker when "Assign Mode"
(vpage 120) in the menu is set to "Front Wide".
v See overleaf