TRENDnet User's Guide
2. Click on the Status tab and click IPv6 Status.
Software Controller utility
Installation
1. Insert the CD ROM included with the access point.
2. Click on Software controller to install the utility.
3. Once the utility is installed click on Discover to refresh the list of access points.
© Copyright 2015 TRENDnet. All Rights Reserved.
4. Select the access point you want to configure.
5. Click on Device settings to configure the access point.
Add and Delete Device
Add device
1. Run the utility
2. To add a device to control select the "+" on the upper right corner
TEW-821DAP
34