Using The Configuration Utility; Configuration Menu - TRENDnet TEW-310APBX User Manual

5. Using the Configuration Menu
The Configuration Menu for the TEW-310APB is web-based. When using the
configuration program, please consider the following:
You will need a JavaScript-enabled web-browser such as the Internet Explorer 4.0
or higher, or the Netscape Navigator 4.0 or higher.
The computer that you are using for initial configuration must setup to receive IP
address from DHCP server (or have an IP Address within the same range as the
IP Address of the TEW-310APB). The TEW-310APB has a default IP Address of
192.168.1.1 with subnet mask 255.255.255.0 and DHCP Server function enabled.
If you are using an Internet router with its DHCP server enabled, please do not
connect the TEW-310APB to the network. You will need to configure the TEW-
310APB, disable its DHCP Server and enable the DHCP Client.
If you have static IP address for each network device, please prepare a computer
with DHCP client enabled and use this computer to configure the TEW-310APB's
IP address to fit your network.
Factory Default Setting for the TEW-310APB
ESSID
Channel
WEP
User Name
Password
IP Address
DHCP Server
DHCP Client

Configuration Menu

Whenever you want to configure your network or the TEW-310APB, you can
access the Configuration Utility by opening the web-browser and typing in the
IP Address of the TEW-310APB. The TEW-310APB default IP Address is
shownin Fig 5.1.
default
1
disabled
admin
admin
192.168.1.1
enabled
disabled
12